I'm going to be cleaning a fence tomorrow with oil based stain with F-18 Max & Pressure washer, and then treating with Woodrestore and then restaining. Any tips or words of wisdom woould be greatly appreciated.
Brandon Vaughn said
Jun 14, 2016
I've never personally used F-18 - have any pics of the job?
I am not sure how many here do this kind of work, hopefully a few will chime inn. Personally, I do not do stripping of decks, fences, etc. I leave that to the painters and the wood restoration guys. There are probably other contractors that will do this, some chap, and some not so cheap. Not sure how big it is, but you could probably do a couple roofs or siding jobs in at least in the time you will spend on that fence. Completely stripping paint or stain with a pressure washer is an extremely time consuming job. Unfortunately, it is a pretty common request as well. I would build a professional relationship with a good painter in your area for future requests like this.
My advice is if you have committed to the job already, go to a good paint store (Sherwin Williams) and ask what they recommend based on what the customer wants the outcome to be, and if the customer's expectations are even possible. If you have not already committed to this job, I would pass on it.
Sorry, hope that's not too discouraging. But you can go out and get a couple siding or roof jobs instead and make a lot more $$ with a lot less headaches.
If any others here do this type of work and have an efficient way of doing it, please chime in.
James King said
Jun 16, 2016
Yeah I have already committed to this job. I have gotten a lot of useful information on another powerwash Forum. There is not very much algae or mold here in my area (Texas Panhandle). Most of the work here consist of fences, decks, concrete, stains on houses and building's, hood vents and Cedar Shake roofs.
Jeffrey Kirby said
Jun 16, 2016
James,
Stripping wood sealer is not that complicated. Keep it simple.
1) wet it
2) apply 1-2% SH with a sodium hydroxide (or potassium hydroxide) degreaser, like Terra Wash. at least 3-4 ounces per gallon. '
3) let it dwell. keep it wet. You should see the oil in the solution, as a rainbow in the solution.
4) rinse. IF the degreaser (soap) does it's job, the pressure washer may not even be needed.
This will remove enough of an oil based sealer to allow additional coats to be applied. This will not completely strip out the wood. That is not a clean, but a restoration.
I've never personally used F-18 - have any pics of the job?
I am not sure how many here do this kind of work, hopefully a few will chime inn. Personally, I do not do stripping of decks, fences, etc. I leave that to the painters and the wood restoration guys. There are probably other contractors that will do this, some chap, and some not so cheap. Not sure how big it is, but you could probably do a couple roofs or siding jobs in at least in the time you will spend on that fence. Completely stripping paint or stain with a pressure washer is an extremely time consuming job. Unfortunately, it is a pretty common request as well. I would build a professional relationship with a good painter in your area for future requests like this.
My advice is if you have committed to the job already, go to a good paint store (Sherwin Williams) and ask what they recommend based on what the customer wants the outcome to be, and if the customer's expectations are even possible. If you have not already committed to this job, I would pass on it.
Sorry, hope that's not too discouraging. But you can go out and get a couple siding or roof jobs instead and make a lot more $$ with a lot less headaches.
If any others here do this type of work and have an efficient way of doing it, please chime in.
James,
Stripping wood sealer is not that complicated. Keep it simple.
1) wet it
2) apply 1-2% SH with a sodium hydroxide (or potassium hydroxide) degreaser, like Terra Wash. at least 3-4 ounces per gallon. '
3) let it dwell. keep it wet. You should see the oil in the solution, as a rainbow in the solution.
4) rinse. IF the degreaser (soap) does it's job, the pressure washer may not even be needed.
This will remove enough of an oil based sealer to allow additional coats to be applied. This will not completely strip out the wood. That is not a clean, but a restoration.