I'm soft washing vinyl house and the customer has a metal roof.... Will my sh cause any damage to the metal rooamend how should I approach this. Thanks
Alejandro Riojas said
Jul 4, 2014
Rinse very well and use bleach wash or any other bleach neutralizer and you should be good!
Tim Teed said
Jul 4, 2014
try a 1% solution, adjust as needed. Finish with bleach wash
Jesus Mendoza said
Mar 14, 2017
I have to wash a ceiling the client says it is metal and that he wishes he did not walk around. When I saw the roof I looked more like tile. Which solution would use to clean (2% cry 1% Green wash and then use finish wash) please help me.
JE REVOVATION
JESUS
Tim Teed said
Mar 14, 2017
Some metal roofs are make to look like tile. They have a baked on paint finish. just test a small section.
Jesus Mendoza said
Mar 15, 2017
It is necessary to rinse clean water to the metal. Or leave it with the chemicals.
Troy Layman said
Mar 16, 2017
Jesus,
Do you have any photos of the roof?
As Tim said, start with a lower concentration of SH and see if it gets the job done effectively, and bump up from there if you need to. Green Wash is always 1 ounce per gallon (not the 6X concentrated) unless you are working on steep roofs/steep surfaces or vertical surfaces, in which case you should add some more GW. Rinse the roof, apply final wash, and rinse again with cold water to set the wax.
I'm soft washing vinyl house and the customer has a metal roof.... Will my sh cause any damage to the metal rooamend how should I approach this. Thanks
I have to wash a ceiling the client says it is metal and that he wishes he did not walk around. When I saw the roof I looked more like tile. Which solution would use to clean (2% cry 1% Green wash and then use finish wash) please help me.
JE REVOVATION
JESUS
It is necessary to rinse clean water to the metal. Or leave it with the chemicals.
Do you have any photos of the roof?
As Tim said, start with a lower concentration of SH and see if it gets the job done effectively, and bump up from there if you need to. Green Wash is always 1 ounce per gallon (not the 6X concentrated) unless you are working on steep roofs/steep surfaces or vertical surfaces, in which case you should add some more GW. Rinse the roof, apply final wash, and rinse again with cold water to set the wax.