Ordered a dayton booster pump from Ebay a few months back (ok maybe a year ago). I reckon it got dropped during shipping, as the frame was a little bent, but didn't pay any attention to it. It sat in the garage and was going to be used as a back-up one day. Well, "one day" finally came, and the pump wound't work. Way too long ago to get money back from seller, file a claim, etc. Turns out the electric motor has gotten bent a smidge and ruined the motor, but pump head was still good. Started playing around a little bit and came up with this compromise for a spare rinse pump.
Thats a 2 HP engine and belt drive ( engine was 99 bucks at harbor freight) and about 30 dollars in other fittings, pulleys, etc.
If I like the way it performs after a day of work, I will have a custom aluminum base cut for it, and guard installed for the belt.
There is always more than one way to skin a cat!
-- Edited by Ray Burke on Friday 26th of July 2013 08:07:10 PM
looks like a nice area to to some pump building, with those nice columns and everything. LOL, nice job Ray, Pure Genius
AC Lockyer said
Jul 27, 2013
McRaver
Tim Teed said
Jul 28, 2013
We just got our booster pump. I wish I got it last year. We did a cedar roof this week and it made rinsing so much easier. We were able to run 2 hoses off it and it was still better than one hose without the pump.. It also saves a lot of time filling the tanks. We also get a better rinse when using CH.
I got it on ebay from Zoro Tools for $435. Its meant to be hard wired, so I bought a 25' 14 gauge outdoor extension cord and cut one end off and wired it. You have to move a couple wires because it came wired for 230 v. Easy to do. I'm going to bolt it onto the back vertical frame of my generation 1 rig.
John Orrico said
Jul 28, 2013
Thank you, Tim
Micheal Pumphrey said
Jul 28, 2013
Are you able to run this without a buffer tank?
Tim Teed said
Jul 29, 2013
No buffer tank. Just hook garden horse into input
Zach Maynard said
Jul 31, 2013
These pumps are a no brainer! We will be incorporating these on all trucks from now on.
Can someone explain how this operates to me? I just saw AC's latest video and would really like to increase my rinse output.
- Does the booster pump connect to a gardenhose line that is turned on and "boosts" the outage load? and do you connect a garden hose to the other side or high pressure hose?
- Do they make 120V models I can hook up to a customers electric supply?
- I don't need to have a tank to draw fresh water from correct?
Appreciate any help guys. I feel like it's so complicated just because I haven't seen the set up in person.
John Aloisio said
Oct 2, 2013
Yes, yes and no. To answer your questions. Matt we use the same pump from Grainger got it 425.00 on sale a couple months ago. Makes rinsing fast. Also, it helps with plant protection as it puts out so much volume when insing them. Find some Underhill golf course nozzles and I will really rinse.
Tim Teed said
Oct 2, 2013
Just order the model in John's photo. Its easy to move wires to make 120V. Just put garden hose in and a garden hose out.
I got it on ebay from Zoro Tools for $435. Its meant to be hard wired, so I bought a 25' 14 gauge outdoor extension cord and cut one end off and wired it. You have to move a couple wires because it came wired for 230 v. Easy to do. I'm going to bolt it onto the back vertical frame of my generation 1 rig.
Well said, Tim. I'm wondering if you put a pressure relief valve on it.
Do you need one? How about a pressure gauge? Will the pump burn up after running with no water out of the gun for a while?
I'm sold on those pumps! Brandon showed us his at our Revolution get together...
Thank you, Brandon! Looking forward to your next one!
vic
Tim Teed said
Aug 25, 2015
I'm not good at tinkering. Unless you find a spot where it can be mounted, they take up some space. You can get smaller 1/2 or 3/4 hp booster pump at harbor freight for around $125. They don't put out as much water as the Dayton, but it increases water flow and they are a lot smaller and easy to move around. If you set up a dedicated water tank on your rig then the dayton pump is way to go.
Howdy Dave, That's a great setup for the Gen II. I have a Gen II with the buffer tank as well.
Does anyone know if the booster pump module listed comes with an adapter kit from the Soft Wash on line store, to fit the gen II 40 gal buffer tank? Looks like I would need the 90 degree angle lengths, to mount on the existing top frame. Does it come with it?
I have an older Dayton booster pump and lug it around, without a pressure switch. (yep... I have had to patch hoses) it would be great to get a new and professional setup like yours. I just completed a job this past week end with well water...the booster pump literally saved the job and many hours hours!
thanks in advance
Jeff
-- Edited by Jeff Newman on Tuesday 25th of August 2015 10:36:45 PM
-- Edited by Jeff Newman on Tuesday 25th of August 2015 10:42:53 PM
-- Edited by Jeff Newman on Wednesday 26th of August 2015 07:20:41 AM
David Rhodes said
Aug 26, 2015
Jeff,
The 90 degree angle mounting tabs are welded to the Gen III style tank strap. You will need to have your existing buffer tank modified to mount the current bulk rinse pump bracket with valves. Give Whitney a call, she can get you set up with the bracket.
It is well worth mounting the pump, lugging is not much fun and takes so much more time to set up and break down. Now we use the bulk rinse pump on every job. It also makes applying Plant Wash a breeze!!!!
David
AC Lockyer said
Aug 26, 2015
Jeff Newman wrote:
Howdy Dave, That's a great setup for the Gen II. I have a Gen II with the buffer tank as well.
Does anyone know if the booster pump module listed comes with an adapter kit from the Soft Wash on line store, to fit the gen II 40 gal buffer tank? Looks like I would need the 90 degree angle lengths, to mount on the existing top frame. Does it come with it?
I have an older Dayton booster pump and lug it around, without a pressure switch. (yep... I have had to patch hoses) it would be great to get a new and professional setup like yours. I just completed a job this past week end with well water...the booster pump literally saved the job and many hours hours!
thanks in advance
Jeff
-- Edited by Jeff Newman on Tuesday 25th of August 2015 10:36:45 PM
-- Edited by Jeff Newman on Tuesday 25th of August 2015 10:42:53 PM
-- Edited by Jeff Newman on Wednesday 26th of August 2015 07:20:41 AM
Are you saying you currently have the tank in place or just the hole for the tank?????
AC
Jeff Newman said
Aug 26, 2015
Dave, Hello and thank you for the advice and info. I'll give Whitney a call this week.
AC, I have the Gen II 40 gallon buffer tank in place.
V/r Jeff
AC Lockyer said
Aug 26, 2015
Jeff Newman wrote:
Dave, Hello and thank you for the advice and info. I'll give Whitney a call this week.
AC, I have the Gen II 40 gallon buffer tank in place.
V/r Jeff
Do you currently have anything ontop of the tank? Can you post a pic?
AC
Jeff Newman said
Aug 29, 2015
AC..here you go. The yellow hose is a bottom tank feed out hose, and the right side has the brass inlet fitting. Both black caps come off. It came with the cradle as an option when i bought the skid as is.
Thank you
Jeff
-- Edited by Jeff Newman on Sunday 30th of August 2015 08:12:09 AM
-- Edited by AC Lockyer on Monday 31st of August 2015 08:36:04 PM
That should be an easy mod Jeff. Call David at our office. He can get you the parts.
AC
Troy Layman said
Jun 2, 2018
Good afternoon all,
I'm looking at getting a booster pump. Do they come with pressure shut off switches, and if not, where could I find one? GFCI or any other parts that I should consider?
Thanks in advance!
Tim Teed said
Jun 6, 2018
If you order they typically don't come with pressure switch. Call SWS they have have pressure switch that they use on the booster pumps they sell
Ordered a dayton booster pump from Ebay a few months back (ok maybe a year ago). I reckon it got dropped during shipping, as the frame was a little bent, but didn't pay any attention to it. It sat in the garage and was going to be used as a back-up one day. Well, "one day" finally came, and the pump wound't work. Way too long ago to get money back from seller, file a claim, etc. Turns out the electric motor has gotten bent a smidge and ruined the motor, but pump head was still good. Started playing around a little bit and came up with this compromise for a spare rinse pump.
Thats a 2 HP engine and belt drive ( engine was 99 bucks at harbor freight) and about 30 dollars in other fittings, pulleys, etc.
If I like the way it performs after a day of work, I will have a custom aluminum base cut for it, and guard installed for the belt.
There is always more than one way to skin a cat!
-- Edited by Ray Burke on Friday 26th of July 2013 08:07:10 PM
Ray this is sweet! Let us know how it works.
We just got our booster pump. I wish I got it last year. We did a cedar roof this week and it made rinsing so much easier. We were able to run 2 hoses off it and it was still better than one hose without the pump.. It also saves a lot of time filling the tanks. We also get a better rinse when using CH.
Tim,
What pump did you purchase?
DAYTON 5NXZ3 Pump,Booster,CI,3/4 HP,115/230V
I got it on ebay from Zoro Tools for $435. Its meant to be hard wired, so I bought a 25' 14 gauge outdoor extension cord and cut one end off and wired it. You have to move a couple wires because it came wired for 230 v. Easy to do. I'm going to bolt it onto the back vertical frame of my generation 1 rig.
Thank you, Tim
No buffer tank. Just hook garden horse into input
Picked ours up today. What a great investment
- Does the booster pump connect to a gardenhose line that is turned on and "boosts" the outage load? and do you connect a garden hose to the other side or high pressure hose?
- Do they make 120V models I can hook up to a customers electric supply?
- I don't need to have a tank to draw fresh water from correct?
Appreciate any help guys. I feel like it's so complicated just because I haven't seen the set up in person.
Yes, yes and no. To answer your questions. Matt we use the same pump from Grainger got it 425.00 on sale a couple months ago. Makes rinsing fast. Also, it helps with plant protection as it puts out so much volume when insing them. Find some Underhill golf course nozzles and I will really rinse.
Just order the model in John's photo. Its easy to move wires to make 120V. Just put garden hose in and a garden hose out.
Well said, Tim. I'm wondering if you put a pressure relief valve on it.
Do you need one? How about a pressure gauge? Will the pump burn up after running with no water out of the gun for a while?
I'm sold on those pumps! Brandon showed us his at our Revolution get together...
Thank you, Brandon! Looking forward to your next one!
vic
Here is a pic of a dedicated rig.
AC
http://www.jracenstein.com/item/150-0818/softwash-systems-bulk-rinse-module/default.asp?sort=y7aqa
This is an excellent thread! Thank you for the follow ups, Tim and AC!
Just in case you have a Gen II, check this out!!!
40 Gallon Buffer Tank w/ Gen III style tank strap.
David
-- Edited by David Rhodes on Tuesday 25th of August 2015 07:19:24 PM
-- Edited by David Rhodes on Tuesday 25th of August 2015 07:39:21 PM
Howdy Dave, That's a great setup for the Gen II. I have a Gen II with the buffer tank as well.
Does anyone know if the booster pump module listed comes with an adapter kit from the Soft Wash on line store, to fit the gen II 40 gal buffer tank? Looks like I would need the 90 degree angle lengths, to mount on the existing top frame. Does it come with it?
I have an older Dayton booster pump and lug it around, without a pressure switch. (yep... I have had to patch hoses) it would be great to get a new and professional setup like yours. I just completed a job this past week end with well water...the booster pump literally saved the job and many hours hours!
thanks in advance
Jeff
-- Edited by Jeff Newman on Tuesday 25th of August 2015 10:36:45 PM
-- Edited by Jeff Newman on Tuesday 25th of August 2015 10:42:53 PM
-- Edited by Jeff Newman on Wednesday 26th of August 2015 07:20:41 AM
Jeff,
The 90 degree angle mounting tabs are welded to the Gen III style tank strap. You will need to have your existing buffer tank modified to mount the current bulk rinse pump bracket with valves. Give Whitney a call, she can get you set up with the bracket.
It is well worth mounting the pump, lugging is not much fun and takes so much more time to set up and break down. Now we use the bulk rinse pump on every job. It also makes applying Plant Wash a breeze!!!!
David
Are you saying you currently have the tank in place or just the hole for the tank?????
AC
Dave, Hello and thank you for the advice and info. I'll give Whitney a call this week.
AC, I have the Gen II 40 gallon buffer tank in place.
V/r Jeff
Do you currently have anything ontop of the tank? Can you post a pic?
AC
AC..here you go. The yellow hose is a bottom tank feed out hose, and the right side has the brass inlet fitting. Both black caps come off. It came with the cradle as an option when i bought the skid as is.
Thank you
Jeff
-- Edited by Jeff Newman on Sunday 30th of August 2015 08:12:09 AM
-- Edited by AC Lockyer on Monday 31st of August 2015 08:36:04 PM
AC
I'm looking at getting a booster pump. Do they come with pressure shut off switches, and if not, where could I find one? GFCI or any other parts that I should consider?
Thanks in advance!