When you complete a test at the end of a SoftWash Systems Module by clicking submit at the bottom of the page a pass / fail page will be generated. If you have scored an 80% or more you will see a CONGRATULATIONS YOU HAVE SCORED 80% message.
Though the page may not say exactly which modules test you have taken the code is embeded in the page to generate a header with that info once you print it.
Printing the page is simple.
1. Hoover your mouse over the page.
2. Right hand click over that page. (mac users just do what mac users do, I am a PC)
3. Select print from the drop down menu that right clicking creates.
This operation will allow you to print the pages.
Alternate Process.
1. While the pass / fail page is visible on your screen hit the Ctrl and PrtSc keys in unisen.
2. Go to your fav word processing program.
3. Open a new document.
4. Go to the Edit Menu and select the command Paste.
5. The pass / fail page will load there.
6. Name the document for what certification you are trying to achieve.
7. Each time you take a modules test repeat steps 1 - 4.
8. At the end of the entire certification send the completed word processing doc with all screen shots of the pass / fail page attached by e-mail to me.
Hope this helps!
AC
Jim Prom said
Feb 4, 2012
This still does not help us print out the modules to add to our binders. Or am I missing something? Thanks for your help AC
gutterdog said
Feb 4, 2012
It does say up top which module it is!
Think I'm going to find a rock and crawl under it..... lol!!!
Jim Prom said
Feb 4, 2012
Mike just so you know there are a ton of bugs in the system for the modules and the printing thereof. Some of the pass/fail pages do not tell you which module you have passed and we were told that would could print the entire PP slideshow out and add that to our binder of all the modules. I am very computer savvy and if I am having problems I know others out there are having issues too. One other person even got to the test after the module and there was no test. Furthermore the drop down menu to print is not there at all on some of the pass / fail pages so you need to hit ctrl p to print that page and then it may not even tel you what module you just passed. We are not idiots, we are just trying to further our education and help others who may be having the same issues but may be afraid to ask for help. No one needs to be put down for having an issue with a computer based training module!
Chris Madden said
Feb 4, 2012
jipro wrote:
Mike just so you know there are a ton of bugs in the system for the modules and the printing thereof. Some of the pass/fail pages do not tell you which module you have passed and we were told that would could print the entire PP slideshow out and add that to our binder of all the modules. I am very computer savvy and if I am having problems I know others out there are having issues too. One other person even got to the test after the module and there was no test. Furthermore the drop down menu to print is not there at all on some of the pass / fail pages so you need to hit ctrl p to print that page and then it may not even tel you what module you just passed. We are not idiots, we are just trying to further our education and help others who may be having the same issues but may be afraid to ask for help. No one needs to be put down for having an issue with a computer based training module!
Hey Jim,
I was going to call you, but I do not see a phone contact in your profile. can you please email me a list of the modules you took and the issues you ran into. I will get with AC, and Instapresenter and see that these issues get ironed out. Sorry for any inconvenience.
chris@palmettopowerwash.com
Chris
Jim Prom said
Feb 4, 2012
Chris, module # 9 has the wrong code I believe the correct code is the one behind #8 or was it #10 AC gave me the correct code...anyway module #2 does not print out what module you passed on the pass / fail page #9 did print out what module it was and the dropdown menu has only worked to print on module #9 so far. I have had to use ctrl p to print the rest so far. Finally we were suppose to be able to print the PP of the module from the pass / fail page to add to our binder and that does not work on any I have taken yet, AC said he was going to work on that today. You can reach my cell at 507-381-4597 or my office at 352-508-9184. Have a great day!
Jim Prom said
Feb 4, 2012
Chris module #4 on PPE when you are done the sest does not come up...this is not a pop up issue, the URL is not a working URL.
gutterdog said
Feb 5, 2012
ok I got through
lead tech daily duties soft wash driver road rules intro to soft wash safty science and technology.
PPE Check Out, the test never showed up.
AC Lockyer said
Feb 5, 2012
Hey Y'all,
I just sent out an updated e-mail with corrected codes.
AC
Danny Cronauer said
Feb 5, 2012
I took the same test 4 times, because I was getting no specific results, now it all makes sense. Anyway I did send a fax over, I hope they all came through.
gutterdog said
Feb 7, 2012
I only need 2 more! Soft wash roof spraying and soft wash surface spraying. Or am I to take plant and property protection, and which spraying technique, code just says spraying technique??? I'm going for lead tech cert.
AC Lockyer said
Feb 7, 2012
gutterdog wrote:
I only need 2 more! Soft wash roof spraying and soft wash surface spraying. Or am I to take plant and property protection, and which spraying technique, code just says spraying technique??? I'm going for lead tech cert.
Mike take the roof spraying tech and plant and prop protection.
AC
gutterdog said
Feb 8, 2012
Done!!!! glad that off me! lol!!! When is a good time to fax the pages???
Danny Cronauer said
Feb 8, 2012
I faxed my pages, last week do we get an email response or are they sent in the mail?
Dan
AC Lockyer said
Feb 8, 2012
Apex Roof Cleaning Wilkes-Barre PA wrote:
I faxed my pages, last week do we get an email response or are they sent in the mail?
Dan
I am catching up. You will get the SoftWash Cares cert for the plant and prop module digitally so you can print and frame. You already recieved the Lead Tech Certificate at the event.
Thanks,
AC
John Finch said
Feb 8, 2012
I have taken all the ones that had a hyper link on the e mail, is there a way to take the others we have the codes for or is that for the next event?
AC Lockyer said
Feb 8, 2012
Bogator wrote:
I have taken all the ones that had a hyper link on the e mail, is there a way to take the others we have the codes for or is that for the next event?
I will have 5 more up by weeks end.
AC
John Orrico said
Feb 27, 2012
AC,
The Employee Management Module is still skipping and the test will not come up on the Guerrilla Marketing Module.
Thank you,
John
AC Lockyer said
Feb 29, 2012
I am finally back home. Will address these this week.
AC
John Orrico said
Feb 29, 2012
Thank you,
John
Laurie Benjamin said
May 16, 2012
i plan to start lead tech 8 modules tomorrow, while information is power i would still need to have proof...Are these problems sorted out..? i would have to waist my money.. In Trinidad we have a saying " a fisherman would never say his fish is rotten" Can i be guided accordingly..?
Hello SWC,
When you complete a test at the end of a SoftWash Systems Module by clicking submit at the bottom of the page a pass / fail page will be generated. If you have scored an 80% or more you will see a CONGRATULATIONS YOU HAVE SCORED 80% message.
Though the page may not say exactly which modules test you have taken the code is embeded in the page to generate a header with that info once you print it.
Printing the page is simple.
1. Hoover your mouse over the page.
2. Right hand click over that page. (mac users just do what mac users do, I am a PC)
3. Select print from the drop down menu that right clicking creates.
This operation will allow you to print the pages.
Alternate Process.
1. While the pass / fail page is visible on your screen hit the Ctrl and PrtSc keys in unisen.
2. Go to your fav word processing program.
3. Open a new document.
4. Go to the Edit Menu and select the command Paste.
5. The pass / fail page will load there.
6. Name the document for what certification you are trying to achieve.
7. Each time you take a modules test repeat steps 1 - 4.
8. At the end of the entire certification send the completed word processing doc with all screen shots of the pass / fail page attached by e-mail to me.
Hope this helps!
AC
Think I'm going to find a rock and crawl under it..... lol!!!
Hey Jim,
I was going to call you, but I do not see a phone contact in your profile. can you please email me a list of the modules you took and the issues you ran into. I will get with AC, and Instapresenter and see that these issues get ironed out. Sorry for any inconvenience.
chris@palmettopowerwash.com
Chris
lead tech daily duties
soft wash driver road rules
intro to soft wash safty
science and technology.
PPE Check Out, the test never showed up.
I just sent out an updated e-mail with corrected codes.
AC
Mike take the roof spraying tech and plant and prop protection.
AC
Dan
I am catching up. You will get the SoftWash Cares cert for the plant and prop module digitally so you can print and frame. You already recieved the Lead Tech Certificate at the event.
Thanks,
AC
I will have 5 more up by weeks end.
AC
AC,
The Employee Management Module is still skipping and the test will not come up on the Guerrilla Marketing Module.
Thank you,
John
AC
In Trinidad we have a saying " a fisherman would never say his fish is rotten" Can i be guided accordingly..?